Goto Intro Page
Junking Repair Studio

Art Of Junking
Repair Studio


Learn These Repair Techniques That Have Been Developed And Used
For Vacuums...

Dirty vacuums Disassemble and clean all parts
Broken or defective parts Replace with replacement parts, bags, belts, lights etc
Poor appearance Clean with Lacquer Thinner

Touch up with paint

Loud clanking noise when running If it's not tolerable, discard the vacuum, it has a cracked or broken impeller blade(s)
Will not run Check and replace switch

Check for short in electrical system

Discard vacuum, the motor is defective

Will not clean carpet properly Replace bag

Replace belt

Replace beater bar

Adjust height adjuster up or down

Discard vacuum, the motor is defective

COMMENT Stock up on vacuum parts

Always turn OFF vacuum when not using it

BBQ'S---Wheel Barrels